The sturdy Intellinet 508261 8-Port Gigabit Ethernet PoE+ Industrial Switch with 2 SFP Ports has IEEE 802.3at/af (PoE+/PoE) Compliant, PoE Power Budget up to 240 W, IP40-Rated Metal Housing, Endspan, DIN-Rail Mount provides power and data connections for up to eight PoE network devices, is a cost efficient solution in the installation by delivering data and power over existing network cables, made from IP40 slim-type metal housing to withstand harsh industrial conditions.

Features:

• Wide operating temperature: -40 – 75℃ (-40 – 167°F)
• Option for DIN-rail installation
• 10/100/1000 auto-sensing ports that automatically detect optimal network speeds
• Two small form-factor pluggable GBIC module slots (SFP)
• IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports
• Power output up to 30 watts per port
• PoE power budget of 240 watts (depending on the power supply used)
• Two redundant DC inputs (45 – 57 V) with I/O terminal block
• Power failure alarm (one-way relay output, current load capacity 1A @ 24 V DC)
• Port surge protection up to 6 kV
• Grounding point to protect equipment from external electrical surges
• Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32) and vibration (IEC 60068-2-6)
• 20 Gbps switch fabric
• Supports IEEE 802.3at- and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras, etc.)
• Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
• Auto-MDIX and NWay auto-negotiation support on all RJ45 ports
• Provides IEEE 802.1x port-based security
• Supports 4k MAC address entries with Auto-Learning and Auto-Aging
• Supports jumbo frames up to 9.6 kBytes
• Store and forward-switching architecture
• Full/half duplex operation
• IEEE 802.3x flow control for full duplex
• LEDs for power, link/activity, PoE and SFP
• Fanless design for silent operation
• Requires additional industrial power supply (not included)

Specifications:

Standards

• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3ab (Twisted pair Gigabit Ethernet)
• IEEE 802.3af (Power over Ethernet 802.3at Type 1)
• IEEE 802.3at (Power over Ethernet 802.3at Type 2)
• IEEE 802.3i (Twisted pair 10BASE-T Fast Ethernet)
• IEEE 802.3u (100Base-TX Fast Ethernet)
• IEEE 802.3x (Flow control for full-duplex mode)
• IEEE 802.3z (1000BASE-X Gigabit Ethernet)

General
• Media support:
RJ45 —
- 10Base-T: Cat3, 4, 5 UTP/STP
- 100Base-TX: Cat5 UTP/STP
- 1000Base-T: Cat5e UTP/STP
SFP —
- 1000Base-SX: 50 μm / 62.5 μm MMF (2 – 550 m)
- 1000Base-LX: 50 μm / 62.5 μm MMF (2 – 550 m) or 10 μm SMF (2 – 5,000 m)
• Packet filter/forwarding rate:
- 1,488,000 pps (1,000 Mbps)
- 148,800 pps (100 Mbps)
- 14,880 pps (10 Mbps)
• MAC address table: 4k
• Backplane speed / switch fabric: 20 Gbps
• Switch architecture: store and forward
• Certifications: FCC Class A, CE, UKCA, NDAA

LEDs

• PoE
• Power
• Link/activity
• SFP

Pinout RJ45 output ports, mode A
• Pin 1: DC (+)
• Pin 2: DC (+)
• Pin 3: DC (-)
• Pin 6: DC (-)

Power

• DC input voltage: 45 – 57 V
• Power consumption: 255 watts (maximum)

Environmental

• Metal housing
• DIN-rail: In accordance with IEC/EN 60715 (top hat)
• Operating temperature: -40 – 75℃ (-40 – 167°F)
• Operating humidity: 5 – 95% RH, non-condensing
• Storage temperature: -40 – 85°C (-40 – 185°F)

Package Contents:

• 8-Port Gigabit Ethernet PoE+ Industrial Switch with 2 SFP Ports
• DIN-rail mount bracket

Dimensions: 7.48 (L) x 3.98 (W) x 1.38 (H) [inches]

A minimum order amount of $50 is required in order to Maintain Wholesale Price

NEW IN THE BOX