IP63-rated Industrial 1-Port 802.3at PoE+ to 2-Port 802.3af PoE Extender (-40~75 degrees C), 3 x waterproof RJ45 connectors included

Physical Port
3 10/100/1000BASE-T Gigabit RJ45 interfaces
- 1-port data + power input
- 2-port data + power output

Power over Ethernet
1-port data + power input
- Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD
Supports PoE input power up to 30.8 watts
2-port data + power output
- Complies with IEEE 802.3af/802.3at Power over Ethernet/end-span PSE
- Up to 2 IEEE 802.3af/802.3at devices powered
- Supports PoE power up to 25 watts for each PoE port
- Auto detects powered device (PD)
Extends the range of PoE to an additional 100 meters (328ft.)
Forwards both Ethernet data and PoE power to remote device

Layer 2 Features
Hardware based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation and auto MDI/MDI-X
Features Store-and-Forward mode with wire-speed filtering and forwarding rates
IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
Integrates address look-up engine, supporting 8K absolute MAC addresses
9K jumbo frame support in 1000Mbps duplex mode
Automatic address learning and address aging
Supports CSMA/CD protocol

Industrial Case and Installation
IP63-rated aluminum case
Wall-mount design
Waterproof and dustproof
Supports EFT protection of 2000 VDC for power line
Supports 2000 VDC Ethernet ESD protection
-40 to 75 degrees C operating temperature
No external power cable required for installation
Plug and Play installation

NEW IN THE BOX