2 CKT T-1-PRI Card (TEPRI2)
Supported on OS7400 - Only

The OS TEPRI2 Card provides two (2) T-1 (ESF) and/or PRI (23b+d) circuits. To accommodate the two (2) circuits the card must be plugged into any "slot in the OS 7400 Main Cabinet except "slots 0 & 3".

Features

• Each circuit provides 24 channels for T1/PRI CO trunking or for Qsig for PRI networking
• Uses only one slot in the KSU
• The TEPRI2 can be installed in any universal slot
• If the TEPRI2 is installed in the OS7400 main cabinet you get dual circuits per card
• If the TEPRI2 is installed the OS7400 expansion cabinet you get only a single circuit per card
• Both circuits on the TEPRI2 must be used for CO trunking or both for Qsig PRI networking

NEW IN THE BOX