6MP 360° Panormorph IP Camera with Amplified Ceiling Tile Speaker

1.3mm panomorph lens, 6MP 360° IP camera with amplified ceiling tile speaker

The O6PSP1 is a revolutionary product from Speco Technologies that combines a 2’x 2’ amplified IP speaker with a premium 6MP 360° IP camera. Designed specifically for use with Speco Technologies SecureGuard® VMS, you can stream music or send voice messages to this IP addressed speaker, while viewing and recording everything from every direction with the integrated camera. For total convenience, everything is powered via PoE through a single RJ45 connection.

• Sound and video in a single unit.

• A single Ethernet cable (not included) can power the speaker, amplifier and camera using Power over Ethernet (PoE).

• Stream music via the SecureGuard® Streaming app or send voice messages through either the SecureGuard® server or mobile application.

• Camera offers full panoramic 360° imaging which can be viewed, recorded and dewarped via SecureGuard®.

• 2’ x 2’ speaker will drop directly into a ceiling tile grid.

Camera Specifications

Image Sensor : Progressive scan 1/1.8” CMOS, 6MP
Maximum Resolution : 3072 x 2048
Minimum Illumination : F2.8, 0 lux (IR LED on)
Day/Night : IR cut filter
IR Distance : 33 ft. (depending on scene reflection)
White Balance: Auto, Presets, Manual
Compensation L DWDR / BLC / HLC
Electronic Shutter Speed : 1/3 - 1/100000 sec.
DNR 3D

Video Specifications

Main Resolution :
3072x2048 / 2048x2048 / 2048x1536 /
1600x1200 @ 30fps

Compression : H.265, H.264, MJPEG
Bitrate Control : VBR, CBR
Multiple Streaming : 3 stream

Network Specifications

Protocols :
IPv4/v6, TCP, UDP, RTP, RTSP, HTTP,
HTTPS, SMTP, FTP, DHCP, UPnP, DNS

DDNS support : Speco DDNS (free of charge)
Security : User ID & Password protection, IP/Mac address filtering,
digest authentication

Speaker Specifications

RMS Power : 10W
Max Power : 15W
Sensitivity (1W/1M) : 90dB
Maximum SPL (PAX/1M) : 100dB
Driver Impedance : 8 Ohms
Magnet : 5 oz. ferrite
Frequency Response Range : 85Hz - 20kHz
Driver : 8” paper cone woofer, .8” dual cone tweeter

Amplifier Specifications

RMS Power : 10W
Max Power : 15W

Operating Specifications

Power Consumption : 10W
Operating Temperature : -22°F - 140°F
Operating Humidity : 0% - 90% RH

NEW IN THE BOX