The modern Intellinet 561624 8-Port Gigabit Ethernet PoE+ Switch with PoE Passthrough has one PD PoE Port with 95 W Power Input, Seven PSE PoE Ports, PoE Power Budget up to 120 W, IEEE 802.3at/af Compliant and DIN-Rail Mount that supports up to 95 W power input from a PoE injector or switch up to seven PoE network devices with power and data, that doubles the connection distance between PoE source and device from 100 m (328 ft.) to 200 m (656 ft.).

Features:

• Supports up to 95 W power input from a PoE injector or switch
• Provides up to seven PoE network devices with power and data
• Doubles the connection distance between PoE source and device from 100 m (328 ft.) to 200 m (656 ft.)
• Powered via PoE, DC power adapter, or industrial power supply (no power supply is included with this product)
• PoE power budget up to 120 watts (depending on the power supply used)
• Saves installation costs by delivering data and power over existing network cables
• IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports
• Power output up to 30 watts per port
• Grounding point to protect equipment from external electrical surges
• Two redundant DC inputs (48 – 57 V) with I/O terminal block
• Port surge protection up to 6 kV
• Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (e.g., wireless access points, VoIP phones, IP cameras)
• Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
• Option for DIN-rail installation
• Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32) and vibration (IEC 60068-2-6)
• Wide operating temperature: -20 – 75℃ (-4 – 167°F)
• On/off switch to toggle VLAN
• 10/100/1000 auto-sensing ports automatically detect optimal network speeds
• 16 Gbps switch fabric
• Green Ethernet power-saving technology deactivates unused ports and adjusts power levels based on the cable length
• All RJ45 ports with Auto-MDIX (auto uplink) support
• Supports 4k MAC address entries with Auto-Learning and Auto-Aging
• Supports jumbo frames up to 9.2 kBytes
• Store and forward-switching architecture
• Supports IEEE 802.3x flow control on full-duplex and backpressure on half duplex
• LEDs for power, link/activity and PoE
• Fanless design ideal for silent operation

Specifications:

Standards

• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3u (100Base-TX Fast Ethernet)
• IEEE 802.3ab (Twisted Pair Gigabit Ethernet)
• IEEE 802.3af (Power over Ethernet 802.3at Type 1)
• IEEE 802.3at (Power over Ethernet 802.3at Type 2)
• IEEE 802.3az (Energy Efficient Ethernet [EEE])
• IEEE 802.3x (flow control for full-duplex mode)
  
  

General

• Media support:
  - 10Base-T Cat5e UTP/STP RJ45, 8 pin
  - 100Base-TX Cat5e UTP/STP RJ45, 8 pin
  - 1000Base-T Cat5e UTP/STP RJ45, 8 pin
• Packet filter/forwarding rate:
  - 1,488,000 pps (1,000 Mbps)
  - 148,800 pps (100 Mbps)
  - 14,880 pps (10 Mbps)
• MAC address table: 4,000 entries
• Backplane speed: 16 Gbps
• Switch architecture: store and forward
• MTBF: >50,000 hours
• Certifications: FCC Class A, CE, RoHS, UKCA, NDAA
  
  

LEDs

• PoE
• Power
• Link/activity

PoE Pinout

• IEEE 802.3af/at Standard Mode A
  - Pin 1: DC (+)
  - Pin 2: DC (+)
  - Pin 3: DC (-)
  - Pin 6: DC (-)

Power

• Via PD port (port 8)
  - Input: Ultra PoE or IEEE802.3af/at compliant
  - PoE Budget: 95 watts (maximum)
• Via DC power adapter
  - Input: 55 V DC/up to 2.3 A
  - DC plug tip: OD/ID 5.5 x 2.1 mm, length 9.5 mm, inner conductor (+), outer conductor (-)
  - PoE Budget: 120 watts (maximum)
• Via DC industrial power supply
  - Input: 48 – 57 V, up to 2.3 A
  - PoE Budget: 120 watts (maximum)
• Power consumption
  - Max. 125.0 W (with external supply)
  - PoE-powered is variable depending on input
  
  

Environmental

• Metal housing with IP40 rating
• DIN-rail: In accordance with IEC/EN 60715 (top hat)
• Operating temperature: -20 – 70℃ (-4 – 158°F)
• Storage temperature: -40 – 75°C (-40 – 167°F)
• Operating humidity: 10 – 90% RH, non-condensing
• Storage humidity: 5 – 90% RH, non-condensing

Package Contents:

• 8-Port Gigabit Ethernet PoE+ Industrial Switch with PoE Passthrough
• DIN-rail mount bracket
• Instructions
• PLEASE NOTE: No power supply is included with this product.

Dimensions: 4.25 (L) x 5.43 (W) x 1.97 (H) [inches]

A minimum order amount of $50 is required in order to Maintain Wholesale Price

NEW IN THE BOX