The high-performance Intellinet 509565 IIS-8G02POE-120W 8-Port PoE+ 2 x SFP, -20 - 65C, 240W is a IEEE 802.3at/af (PoE+/PoE) Compliant, PoE Power Budget up to 120 W, IP30-Rated Metal Housing, Redundant Power Supply, DIN-Rail Mount.

Features:

• Provides up to eight PoE network devices with power and data
• PoE power budget of 240 watts (depending on the power supply used)
• Two small form-factor pluggable (SFP) GBIC module slots for 1G uplink capability
• IP30 slim-type metal housing to withstand harsh industrial conditions
• Suitable for extreme operating temperatures of -20 to 65ºC (-4 to 149ºF)
• Power output up to 30 watts per port
• Option for DIN-rail installation
• 10/100/1000 auto-sensing ports that automatically detect optimal network speeds
• Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras)
• Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
• Two redundant DC inputs (48 - 55 V) with I/O terminal block
• ESD protection up to 8 kV (air) and 4 kV (contact)
• Port surge protection up to 6 kV
• Grounding point to protect equipment from external electrical surges
• 20 Gbps switch fabric / switching capacity
• Auto-MDIX and NWay auto-negotiation support on all RJ45 ports
• Supports 4k MAC address entries with Auto-Learning and Auto-Aging
• Buffer memory of 1.5 Mbits
• Supports jumbo frames up to 9 kBytes
• Store and forward switching architecture
• Full/half duplex operation
• IEEE 802.3x flow control for full duplex
• LEDs for power, link/activity and PoE
• Fanless design for silent operation
• Requires additional industrial power supply (not included)
• Fully TAA-compliant

Specifications:

Standards

• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3ab (Twisted Pair Gigabit Ethernet)
• IEEE 802.3af (Power over Ethernet 802.3at Type 1)
• IEEE 802.3at (Power over Ethernet 802.3at Type 2)
• IEEE 802.3i (Twisted Pair 10BASE-T Fast Ethernet)
• IEEE 802.3u (100Base-TX Fast Ethernet)
• IEEE 802.3x (Flow control for full-duplex mode)
• IEEE 802.3z (1000BASE-X Gigabit Ethernet)
  
  

General

• Media support:
  - 10Base-T Cat5e/6/6a UTP/STP RJ45
  - 100Base-TX Cat5e/6/6a UTP/STP RJ45
  - 1000Base-T Cat5e/6/6a UTP/STP RJ45
• Packet filter/forwarding rate:
  - 1,488,000 pps (1000 Mbps)
  - 148,800 pps (100 Mbps)
  - 14,880 pps (10 Mbps)
• MAC address table: 4k
• Buffer memory: 1.5 MBits
• Backplane speed / switching capacity: 20 Gbps
• Switch architecture: store and forward
• Certifications: FCC, CE, RoHS, REACH, UKCA, TAA
• MTBF: 1M hours
  
  

Electrical

• Via DC industrial power supply (not included), 6-pin terminal block
  - Input: 48.0 - 55.0 V, up to 5.21 A
  - PoE power budget: 240.0 W (max.)
• DC output: up to 30.0 W per RJ45 PoE port
• Power consumption
  - 250.0 W (max.)
  
  

LEDs

• Power
• Link/activity
• PoE
  
  

Pinout RJ45 output ports: 
- Pin 1: DC (+)
- Pin 2: DC (+)
- Pin 3: DC (-)
- Pin 6: DC (-)

Physical

• IP30-rated metal housing
• DIN rail: In accordance with IEC/EN 60715 (top hat)
• Net weight: 1.09 kg (2.4 lbs.)
• Gross weight: 1.41 kg (3.11 lbs.)
• Operating temperature: -20 - 65°C (-4 - 149°F)
• Storage temperature: -40 - 85°C (-40 - 185°F)
• Operating humidity: 10 - 95% RH, non-condensing
• Storage humidity: 10 - 95% RH, non-condensing
• Recommended AWG for terminal block: 12-24

Dimensions (L x W x H): 210 x 161 x 45 mm (8.27 x 6.34 x 1.77 in.)

"A minimum order amount of $50 is required in order to Maintain Wholesale Price"

NEW IN THE BOX